Page 1
DVD/CD PLAYER - DIGITAL A/V SURROUND RECEIVER 1015D 1055D SURROUND SURROUND RECEIVER RECEIVER Toll Free Help Line Ligne d'assistance en service libre Linea de ayuda telefónica sin cargo 800-531-0039...
Page 2
And most importantly you can count on our uncompromising commitment to your total satisfaction. All of this is our way of saying welcome – and thanks for investing in a Philips product. Sincerely, Lawrence J. Blanford President and Chief Executive Officer P.S.
Page 3
Canada English: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. Français: Cet appareil numérique n'emet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Class B prescrites dans le Règlement sur le Brouillage...
IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.
If any item is damaged or missing, contact your retailer or Philips. DVD discs Your Philips DVD Receiver player will play digital video discs conforming to the universal DVD Video standard. In addition to DVD Video discs, you will be able to play audio CDs.
Front Panel DVD /CD PLAYER - DIGITAL AV SURROUND RECEIVER POWER /STANDBY PRESETS FREQUENCY SURR. MODE FREQUENCY POWER / STANDBY y – to switch between Power On and Standby modes. Standby LED indicator – to indicate Standby mode. SURR. MODE –...
Remote Control § DISPLAY OPEN/CLOSE TITLE TUNER SYSTEM DISC MENU MENU TONE FM MODE SEARCH Notes for remote control: – First, select the source you wish to control by pressing one of the source select keys on the remote control (DVD or TUNER, for example). –...
Rear Panel IMPORTANT! – Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made. – Never make or change any connections with the power switched on. – The type plate is located at the rear of the system. 1 ANTENNA FM Antenna For FM reception, connect the FM antenna to the FM...
7 AUDIO OUT For connecting analog (Left/Right) signals to external recording devices such as VCR or Tape Recorder for recording. 8 FRONT SPEAKERS Connect the left front speaker to the “L” jacks, the right front speaker to the “R” jacks and center speaker to the “C”...
Video Connections Digital/Optical Audio Connections Recording from the digital output The digital output can be used to record digitally a multichannel surround sound audio signal (Dolby Digital or DTS) to a CD-R. To convert the digital multichannel signal into a stereo signal, following settings have to be activated in the Disc Setup Menu : –...
System Setup Setting up the Digital Cinema system You must connect all the speakers and set up the system properly in order to enjoy the Digital Cinema experience at home. You will have the feeling of being in the middle of the action, because sound is coming from everywhere around you.
Setting the speaker distance Press SYSTEM MENU to enter System Setup mode. Press £ to select Speaker Setup. Press ( / ) until Speaker Distance Setup is selected. Press £ to enter Speaker Distance Setup mode. Use ( / ) to select a different speaker. Use à...
Basic Functions Selecting the source Press one of the SOURCE SELECT buttons (VCR, TV, CDR, TUNER or DVD) to select the input source. The selected source will be displayed. Adjusting the master volume The master volume adjusts all speaker channels at the same time.
Page 15
Soundfield Effects The digital Soundfield Effects can recreate the effects of sounds reflected from walls or ceilings to obtain the sound presence of real environments. STADIUM This mode recreates a large stadium effect using very long reverberation times. STAGE This effect recreates a stage environment, emphasizing sound from the front speakers.
Tuner Manual tuning Press TUNER to select tuner mode. After two seconds, the display will show the current waveband and frequency. To switch between FM and AM waveband, press TUNER again. Press FREQUENCY 4 or 3 (or à / á on the remote control) repeatedly to change the frequency.
IMPORTANT! When in DVD/CD mode, it is not possible to operate clock or timer function. Setting the Clock Press SYSTEM MENU to enter System Setup mode. Press ( / ) to select the Clock Setup mode and press £ to confirm. Press à...
DVD/CD Operation Loading Discs Press OPEN/CLOSE 0 to open the disc tray. Load your chosen disc in the tray, label side up. Press OPEN/CLOSE 0 again to close the tray. There will be a short delay while the player identifies the disc and reads the menu from the disc.
Language/Sound There could be alternative language tracks or 2 channel and 5.1 channel audio available on a disc. All discs are different in this respect. Press à or á to cycle through the sound tracks available on the disc, then press £ to confirm. Subtitle Press à...
Active Navigation Menu (music CD) A number of operations can be done with the Active Navigation Menu without interrupting disc playback. Press DISC MENU. The Active Navigation Menu will be displayed across the top of the TV screen. Press ( or ) to move through the Active Navigation Menu. Press DISC MENU or EXIT to exit.
On-screen messages During play, various messages will be shown on the screen for a few seconds to confirm that a function has been selected. You can switch on or off these messages in the “On Screen” setup mode of the System Setup menu. The possible messages may appear are listed below : PLEASE WAIT ...
Disc Setup Menu The selections from the Disc Setup Menu are the preferred options that will be chosen if they are available on a disc. If the disc inserted does not have the preferred option, then the disc’s own preference will be used. IMPORTANT! To access the Disc Setup Menu, playback must be stopped.
TV Aspect [L-Box] means "Letter Box". The picture will be displayed as bottom of the screen. (For disc which support letter box feature) [P-Scan] means "Pan and Scan". The picture fills the whole screen however some parts to left and right may not be visible.
Audio Set Example shows setting of 2 audio channel to 5.1 audio channel (only available on 5.1 Channel models). [ Audio Set ] [ Exit ] Exit DVD/CD O PERATION Rear Speakers Center Speaker Subwoofer...
Digital Out Set up the Digital Audio output for a 5.1 Receiver/Decoder. This menu enables you to set the type of 5.1 output according to your Decoder/Amplifier. The form of each type of Data (Dolby Digital, MPEG or DTS) can be set as a Bitstream or PCM format to suit your Dolby & DTS decoders. [ Digital out ] Parental Control Some DVD discs have a parental level assigned to the disc.
Panel Keys Lock A second method of parental control is also available in the PANEL KEYS option. Set panel keys to OFF and the player can only be operated by the remote control. [ Parental ] [ Exit ] On Screen If the On Screen Display is on, various icons and messages will show on the screen for a few seconds to confirm that a function has been selected.
Program music CD To display the CD program menu, the player must be in CD mode and playback must be stopped. Insert a music CD and close the disc tray. The player will go into CD mode when it identifies the disc.
Speaker drivers ... 3” full range, 1” piezo Dimensions (w x h x d) ... 94 mm x 155 mm x 88 mm Weight ... 0.45 kg SUBWOOFER (MX-1015D) Subwoofer (not magnetically shielded design) ... 6.5” Output power ... 50 W (4 , DIN) THD ...
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province. Philips Service Solutions Group, P.O. Box 2976, Longview,Texas 75606, USA, (903) 242-4800 LIMITED WARRANTY AUDIO SYSTEM...