Audio Out; Analog Audio Connections - Philips 1015D Owner's Manual

7 AUDIO OUT

For connecting analog (Left/Right) signals to external
recording devices such as VCR or Tape Recorder for
recording.
8 FRONT SPEAKERS
Connect the left front speaker to the "L" jacks, the
right front speaker to the "R" jacks and center speaker
to the "C" jacks. Connect the colored (marked) wire
to "+" and the black (unmarked) wire to "-".
a b
9 SURROUND SPEAKERS
Connect the left surround speaker to "SL" jacks and
the right surround speaker to "SR" jacks. Connect the
colored (marked) wire to "+" and the black
(unmarked) wire to "-".

Analog Audio Connections

C
10
ONNECTIONS
c
0 SUBWOOFER OUT
Connect this jack to the AUDIO INPUT jack of the
powered subwoofer.
After completing all the connections, connect the AC
power cord of the player and subwoofer to the wall
outlet. To switch on the subwoofer, rotate the
VOLUME knob at the front panel of subwoofer
clockwise until you hear a click.
Notes:
– To prevent damage to circuits, never short-circuit the
positive and negative speaker output jacks.
– Do not connect more than one speaker to any one pair of
+/- speaker jacks.
– Do not connect speakers with an impedance lower than
the speakers supplied. Please refer to the SPECIFICATIONS
section of this manual.