GE 23 Owner's Manual And Installation Instructions page 7

About the shelves and bins. www.GEAppliances.co
Not all features are on all models.
l Refrigerator Door Bins and Freezer Door Tilt-Out Bins
Refrigerator bin
Freezer bin
t
LargeBins
The larger reflige_v_tor door bins and
fleezer flit-out door bins are adjustable.
Toremove: L ift the fiont of the bin straight
up, then lift up and out.
Thesnugger helps prevent dpping, spilling
or sliding of small items stored on the door
shel£ Place a finger on either side of the
snugger near the rear and move it back
and forth to fit your needs.
Toreplace or mlocate: Engage the back side Donotblock
of the bin in the molded supports of the
dooL Then push down on the flont of the
bin. Bin will lock in place.
SmallBins
To remove: I,iff the flont
of the bin straight
up then out.
To replace: Position
the bin above file
rectangular molded supports on file dooL
Then slide file bin down onto file support
to lock it in place.
CAUTION: O n
models with an ice
chuteinsidethetop
freezer doorbin,be
carefulwhenp/acing
itemsin thebin.
Makesurethat
itemsdo notblock
or fall into theice
chute.
Freezer tilt-out bin
Press tab and pull shelf
forward to remove
Slide-Out Spillproof Shelf
The slide-out spillproof shelf allows you
m reach imms stored behind others. The
special edges are designed m help prevent
spills flom dripping to lower sheNes.
Toremove:
Slide the shelf out until it reaches the stop,
then press down on the tab and slide the
shelf suaight out.
Toreplaceor relocate:
Line the shelf up with the supports and
slide it into place. The shelf can be
reposifioned when the door is at 90 ° or
more. To reposifion the shelf, slide the shelf
past the stops and angle downward. Slide
shelf down m the desired position, line up
with the supports and slide into place.
Makesureyoupush theshelvesall the way back
in beforeyou dose the door.
7