Care; Specifications; Troubleshooting - Philips DVP3560K User Manual

Caution
•
Power supply must not be interrupted during software
upgrade.
1
Press SETUP.
2
Select [Preferences] > [Version Info], and
then press OK.
3
Write down the file name, and then press
SETUP to exit the menu.
4
Visit www.philips.com/support to check for
the latest software version, using the file name
for this product.
5
Refer to the upgrade instructions on the
website for more information.
Note
•
Disconnect the power cord for a few seconds and
connect again to turn on the product.

Care

Caution
•
Never use solvents such as benzene, thinner, cleaners
available commercially, or anti-static sprays intended
for discs.
Clean discs
Wipe the disc with a micro fibre cleaning cloth from
the centre to the edge in a straight line movement.
Specifications
Note
•
Specification and design are subject to change without
notice
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: UMS (USB Mass Storage Class)
Video
• Signal system: PAL / NTSC
• Composite video output: 1 Vpp ~ 75 ohm
• Component video output: 0.7 Vpp ~ 75 ohm
• HDMI output: 480i, 480p, 576i, 576p, 720p,
1080i, 1080p
Audio
• Analog stereo output
20 EN
• Signal to noise ratio (1 kHz): > 90 dB
(A-weighted)
• Dynamic Range (1 kHz): > 80 dB (A-weighted)
• Crosstalk (1 kHz): > 80 dB
• Distortion/noise: (1 kHz): > 65 dB
• MPEG MP3: MPEG Audio L3
• Digital output
• Coaxial
• HDMI output
Main unit
• Dimensions (w x h x d): 360 x 39 x 209 (mm)
• Net Weight: approximately 1.4 kg
Power
• Power supply rating: 110 - 240V, 50/60HZ
• Power consumption: <10 W
• Power consumption in standby mode:
<0.45 W
Accessories supplied
• Remote control and batteries
• HDMI cable
• Audio/Video cables
• AC power cord
• User Manual
Laser specification
• Type: Semiconductor laser InGaAIP (DVD),
AIGaAs (CD)
• Wave length: 655 nm (DVD), 790 nm (CD)
• Output Power: 7.0 mW (DVD), 10.0 mW
(VCD/CD)
• Beam divergence: 60 degrees

9 Troubleshooting

Warning
•
Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, register your product and get
support at www.philips.com/welcome.
If you contact Philips, you will be asked for the model
and serial number of your product. The model
number and serial number are on the back of your
product. Write the numbers here:
Model No. __________________________
Serial No. ___________________________