Connect Usb Flash Drive; Connect Power; Get Started; Prepare The Remote Control - Philips DVP3560K User Manual

Connect analogue stereo system
1
Connect the audio cables (supplied) to:
• the AUDIO OUT L/R jacks on this product.
• the audio input jacks on the device.
Connect USB flash drive
DVD PLAYER DVP3560K
1
Connect a USB flash drive to the
this product.
Note
•
This product can only play/view MP3, WMA, DivX
(Ultra) or JPEG files that are stored on a USB flash drive.
•
Press the button to access the content and play
the files.

Connect power

Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
of the unit.
•
Before connecting the AC power cord, ensure you have
completed all other connections.
Note
•
The type plate is located on the back of the product.
1
Connect the AC power cable to:
• the wall socket.
»
This product is ready to be set up for use.
8 EN
AUDIO IN
jack on

4 Get started

Prepare the remote control

1
Press and push the battery compartment to
slide it open (see "1" in the illustration).
2
Insert two AAA batteries with correct
polarity (+/-) as indicated.
3
Push and slide back the battery compartment
(see "3" in the illustration).
Note
•
If you are not going to use the remote control for a long
time, remove the batteries.
•
Do not mix batteries (old and new or carbon and
alkaline, etc.).
•
Batteries contain chemical substances, so they should be
disposed of properly.

Find the TV input channel

1
Press to turn on this product.
2
Turn on the TV and switch to the video input
channel (refer to the TV user manual on how
to select the A/V input channel).

Select menu display language

Note
•
If this product is connected to a HDMI CEC compliant
TV, skip this setting. It switches automatically to the
same OSD menu language as per your TV setting (if the
language set on TV is supported by this product).