Menu Items - Hitachi FHD7510PC Operation Manual

MENU ITEMS

In DS Monitor, below functions can be controlled
by the user:
1- Auto Colour*
2- Reset
3- ADC Offset*
4- ADC Gain*
5- Correlated Colour Temperatures(CCT)
5.1- 9300K
5.2- 6500K
5.3- 5000K
5.4- 7500K
5.5- User
6- Brightness
7- Auto Config*
8- Exit
*These functions are activated only in VGA mode.
In other modes they don't have any functionality.
Menu Functions can be changed by the using
Remote Control Unit (RCU).
"OK" Button: Selects current function and
-
enables to modify it.
Volume Up/Down- Brightness Up/Down
-
Buttons:

Enable to go to left and right on the
selected row respectively.

Enable to decrease or increase the
selected value respectively.

Enable to go to up and down on the
Functions column respectively.
Source Change Button:
-

Enables to go back from current
adjustment and if it is pressed on the
Functions column, it closes the Menu.
Menu Option
• By pressing Brightness Down, Volume Up,
Brightness Up and Volume Down buttons
consecutively, Menu can be reached also.
Auto Colour Function
Auto Colour function adjusts picture colour
automatically.
Reset
Reset function will set all values to factory defined
values.
ADC Offset
ADC OFFSET function enables to set ADC offset values
in VGA mode
ADC Gain
ADC GAIN function enables to set ADC gain values
in VGA mode.
Correlated Colour Temperatures (CCT)
Pre-defined CCT values are like below:
9300K
• Monitor CCT value comes with 9300K as default.
• The other CCT values are:
• 6500K • 5000K
User
• User section comes with R: 128, G: 128, B: 128 as
default.
Brightness
Picture brightness can be adjusted as changing the
brightness value. It comes with 128 as default.
Increasing and decreasing the 128 much more will
cause saturation on the picture, so it is critical to
adjust this to a proper value for a good image
quality. It changes between 0 and 255.
18
• 7500K