Advertisement
Thank you for your purchase of the Vacuum Cleaner.
Please read these instructions
carefully
before using.
A FEW PRECAUTIONS
1. Operating without
the filter in place will allow dust to enter the motor
2.
3.
and cou[d damage the vacuum cleaner.
Keep the vacuum cleaner away from stoves and other heat
sources.
Heat
can deform and discolor the plastic parts of the unit.
Keep
the
vacuum
cleaner
free
of insecticides.
Do not wipe with
benzine. thinner.
csetrol or other oils which might cause discoloration
or cracking. To clean the
body and hose, dampen
a cloth with a mild
detergent and wipe clean.
4.
Blocking
the suction inlet or allowing the dust to clog the hose will
decrease the efficiency
of the motor.
5. Be sure not to push the clamp
button
while carrying
the vacuum
cleaner.
6. Nkver try to vacwum th~ fcdbving
objects, They may damage the unit
or cause a fire.
7.
8.
9.
10.
11.
Wet things, mud, soil, and fluids
*Burning cigarettes
Needles and razor blades
Inflammable
materials such as gasoline and thinner
The following
kinds of treatment
shorten hose life:
Bending hose at an acute angle when storing
Pulling the hose with excessive force
"Placing heavy objects on, or stepping on the hose
Pull out the plug from the power source after use, Grasp the plug -
not the cord -
when pulling out the plug.
Pulling on the cord may lead to shortcircuiting.
Long and continuous
use causes the exhaust air and the body of the
vacuum
cleaner to become
warm.
This,
however,
does not denote
malfunction.
When
vacuuming
vinyl
mats which
may stick to the floor
nozzle
because of the suction, lift up the rear of the floor nozzle slightly by
moving the wands close to a vertical position.
When vacuuming
places that are very dusty, and also when vacuuming
regularly,
empty
the dust compartment
before it
becomes
completely
filled.
Frequent
emptying
lengthens
the
life of the motor
and maintains
strong suction power.
CARE
AND MAINTENANCE
When you have trouble with the unit, inspect it according to the points in
the
"Trouble-Shooting
Guide"
If
inspection
indicates
a malfunction,
refrain
from
using the unit to avoid damage, and see
your dealer or the
nearest Service Centre.
Symptom
Suction does not get
stronger after cleaning out
the dirt. (Weak suction)
Motor does not run con-
tinuous y. (Motor starts and
stops)
The cord does not go back
fully into the unit.
(For Special area only)
Trouble-Shooting Guide
Items to inspect
.1s the filter
dirty?
Clean the filter.
Is the flew
nrxzle or the hme
dcqg~d
with a
largeobject?
Push it out with a garden hose.
Is the cord damaged whera it is
connected to the
plug, or are you pulling on
the
cord
too hard or
bending it.
Change the cord.
IS the cord twisted
or
wound
uneven
on
the
roller?
Pull the cord out 1-2m and try rewinding it
again.
If the supply cord of this appliance
is damaged, it must only be re-
placed by a repair shop appointed
by the manufacturer,
because special
purpose tool are required.
Advertisement
