Table of Contents
Advertisement
Wireless 802.11 Network Settings
PM23c, PM43, and PM43c Mid-Range Printer User Manual
Wireless 802.11 General Settings (continued)
Setting
Description
Power Mode Select the power management setting for
the radio. Constant Awake provides the
highest throughput but draws the most
power. Power Savingconserves the most
power but provides the lowest throughput.
Fast Power Saving turns off components
when they are not being used to draw less
current.
Channel
Sets the common channel that radios in Ad
Hoc mode use to transfer data. Range is 1
to 13 (1 to 11 for FCC only).
Hidden
Determines if the radio is allowed to look
SSID
for SSIDs that have been hidden to prevent
unauthorized devices from connecting to
the wireless network.
This section describes the 802.11 IPv4 and IPv6 settings. To view these
settings:
•
From the printer Main Menu, select Settings > Communications >
Wireless 802.11 > Network > IPv4 or IPv6.
•
From the printer web page, click the Configure tab,
Communications > Wireless 802.11.
Wireless 802.11 Network Settings
Setting
Description
(IPv4) IP
Sets how the printer obtains an IP
Assignment
address (for IPv4 networks).
Method
(IPv4) IP
Sets the unique network-level
Address
address that is assigned to each
device in an IPv4 network.
Subnet Mask
Sets a number that defines the range
of IP addresses that can be used in
an IPv4 network.
Appendix B – Default Settings
Default
Constant
Awake
1
Disable
Default
DHCP
0.0.0.0
0.0.0.0
129
Advertisement
Table of Contents
