Siemens SINUMERIK 840D Operator's Manual page 99

8
03.04
 Siemens AG, 2004. All rights reserved.
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition
The following working window is then displayed:
RS-232-C Settings working window
Operating sequence
• Use the cursor to select the desired line.
• Change the upper six values with the SELECT key.
• Change the lower values alphanumerically, and if the special
functions (RS-232-C Settings working window, Special functions)
are not to be parameterized as well:
• Transfer the changes to the working memory using the Save
settings softkey.
Further buttons
→ RS-232-C Settings working window: Parameters
Part 2
(2) Special functions
Save settings Save settings and return to calling window.
→ Returns to starting window without accepting the
Recall
changes.
Data Transmission – Operating Area Services
8.2 Read in data
8
8-99