Advertisement
Remote Modem Installation Instructions
28i/124i
2.
For Modem Connection:
Select the Remote Operation in the Windows PC Program and
enter your database password (when requested). Then enter the
modem's telephone number and click Dial.
OR
For Local Connection:
Select the Online (Local) Operation in the Windows PC Program
and enter your database password (when requested).
3. Select either DCI or LAPB, depending on equipment being used.
4. Once connected (this could take a couple of minutes depending on the
type of connection), enter the programming password when requested.
6. Upload a Test Block
Now that you have connected to the system, you should upload a block of data to
make sure that the communications are working correctly.
DOS PC Program Only:
1. From the Main Menu, select Communication and press Enter.
Select ME->PC and press Enter.
2.
Choose Select Programs and press Enter.
3.
4. Select 10 Extension Options and press Enter.
Select 1005 Station Class of Service and press Enter.
5.
Press F10 to upload the data.
6.
7. When you see the Receiving Completed message, press Esc then F8
to return to the Modem Screen.
Press F4 to break the connection, then Esc repeatedly until you
8.
return to the Main Menu.
9.
Quit the Remote Maintenance program and disconnect your test
modem.
Windows PC Program Only:
1. In the Windows PC Program, click the Download icon (
2.
Depending on your software version, the program will either down-
load all the system data or it will give you an option to select the pro-
grams to be downloaded. If your software allows you to select pro-
grams, select the Programs (0902-1904) tab and click the box next
to 1005 Station COS. Click OK.
Click the Exit icon (
2.
Click No to discard the downloaded information.
3.
This marks program 1005 for uploading to your PC.
The data is downloaded to the system.
).
10
).
Advertisement
