Advertisement
384i/704i
10. Type ATDT #*#* and press Enter.
al port. You can then go on to step 11.
11. When the remote system asks for the password, enter the programming
password and press Enter.
code/software version error message, type U to update.
12. Press Esc twice to return to the Main Menu.
704i Only:
To call the site modem:
1. Select the Online (Remote) Operation in the 704i Windows PC
Program and enter your database password (when requested).
Enter the modem's telephone number and click Dial.
2.
3.
Select either DCI or LAPB, depending on equipment being used.
4.
Once the modem connects (this could take a couple of minutes), enter
the programming password when requested.
7. Upload a Test Block
Now that you have connected to the system through your laptop and the site
modem, you should upload a block of data to make sure that the communications
are working correctly.
384i Only:
1. From the Main Menu, select Communication and press Enter.
Select ME->PC and press Enter.
2.
3.
Choose Select Programs and press Enter.
4. Select 10 Extension Options and press Enter.
Select 1005 Station Class of Service and press Enter.
5.
Press F10 to upload the data.
6.
7. When you see the Receiving Completed message, press Esc then F8
to return to the Modem Screen.
Press F4 to break the connection, then Esc repeatedly until you
8.
return to the Main Menu.
9.
Quit the Remote Maintenance program and disconnect your test
modem.
Remote Modem Installation Instructions
If you see ERROR, type ATZ to reset the site modem's DCI/seri-
You can now program the remote system. If you see an ID
The LAPB requires 704i software 1.01.04 or higher.
This marks program 1005 for uploading to your PC.
23
Advertisement
