Panasonic NA-FS80X1 Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Washer
  5. NA-FS80X1
  6. Service manual

Panasonic NA-FS80X1 Service Manual

Fully automatic washing machine
Hide thumbs Also See for NA-FS80X1:
Table of Contents

Advertisement

Quick Links

Service Manual

The service information is designed for experienced repair technicians only and is not designed for use by the general
public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting
to service a product. Products powered by electricity should be serviced or repaired only by experienced professional
technicians. Any attempt to service or repair the product or products dealt within this service information by anyone
else could result in serious injury or death.
There are special components used in this equipment which are important for safety. These parts are marked by
in the Schematic Diagrams, Circuit Board Diagrams, Exploded Views and Replacement Parts List. It is essential that
these critical parts should be replaced with manufacturer's specified parts to prevent shock, fire or other hazards. Do
not modify the original design without permission of manufacturer.
Fully Automatic Washing Machine
WARNING
IMPORTANT SAFETY NOTICE
© Panasonic Appliances (Thailand) Co., Ltd. 2012.
All rights reserved. Unauthorized copying and distribution
is a violation of law.
Order No. PHAT090901C3
(Revision : Mar. 2013)
NA-FS80X1
NA-FS90X1
Product Colour
Thailand, Malaysia, Indonesia
Vietnam, Philippines
Singapore (DBD)
Singapore (RBD)
White
Destination

Advertisement

Table of Contents
loading

Related Manuals for Panasonic NA-FS80X1

Summary of Contents for Panasonic NA-FS80X1

  • Page 1: Service Manual

    Do not modify the original design without permission of manufacturer. © Panasonic Appliances (Thailand) Co., Ltd. 2012. All rights reserved. Unauthorized copying and distribution...

  • Page 2: Table Of Contents

    NA-FS80X1 / FS90X1 CONTENT Page 1. Attention in the Repair Work Security 2. Specification 3. Technical Information 3.1 Eco-Wash Systems 4. Operation Panel 4.1 Control Panel and Functions 4.2 Basic Operations and Indications 5. Program Sequences 8 - 19 6. Installation 20 - 21 7.

  • Page 3: Attention In The Repair Work Security

    NA-FS80X1 / FS90X1 1. ATTENTION IN THE REPAIR WORK SECURITY In order to prevent any accident during repair work and ensure security of the product after repair work, somethings surely followed are explained below. ■ The level of the arised damages or dangers, when indicated contents are ignored, are classified by following indications and explained.

  • Page 4: Specification

    NA-FS80X1 / FS90X1 2. SPECIFICATION Model NA-FS80X1 NA-FS90X1 Rate Voltage 220V/50Hz Vietnam Thailand, Indonesia, Vietnam and Frequency Singapore (RBD) 230V/50Hz Singapore (DBD) Singapore (DBD) 230V/60Hz Philippines 240V/50Hz Malaysia Malaysia Rate Power 220~240V/50/60Hz 270~345W (Wash with load) 279~360W (Wash with load)

  • Page 5: Technical Information

    By rotating a drain tank (tank), water is pushed up through circulation course in a tank (drain tray). to imporve [Water saving circulation system], standard washing quantity of water 116L (NA-FS80X1, FS90X1) is materialized without reducing quantity of circulate water.

  • Page 6: Control Panel And Functions

    NA-FS80X1 / FS90X1 4. OPEATIONS PANEL 4.1 Control Panel and Function - 6 -...

  • Page 7: Basic Operations And Indications

    NA-FS80X1 / FS90X1 4.2 Basic Operations and Indications Turn on the power supply • When power supply turns on, a lamp of [ Normal ] and [ Wash • Rinse • Spin ] turns on. ＊When a child lock has been set, the remaining time display shows [CL].

  • Page 8: Program Sequences

    NA-FS80X1 / FS90X1 5. PROGRAM SEQUENCES End Buzzer Brake Spin Intermittent Spin Drain Brake Bubble Clean Flooding Brake Bubble Limit Spin Bubble Limit Indirect Spin Drain Brake Rinse Tank Rotation Penetration Churning Water Supply Brake Water Supply Tank Rotation Brake...
  • Page 9 NA-FS80X1 / FS90X1 End Buzzer Brake Spin Intermittent Spin Drain Selective Components Water Supply Churning Keep and Churning Churning Without Air Brake Rinse Tank Rotation Brake Rinse Tank Rotation Water Supply Brake Water Supply Tank Rotation Brake Spin Intermittent Spin...
  • Page 10 NA-FS80X1 / FS90X1 End Buzzer Brake Spin Intermittent Spin Drain Brake Bubble Clean water Supply Brake Bubble Cut Drain Bubble Cut Spin Drain Brake Rinse Tank Rotation Penetration Churning Water Supply Brake Water Supply Tank Rotation Brake Spin Intermittent Spin...
  • Page 11 NA-FS80X1 / FS90X1 End Buzzer Brake Spin Intermittent Spin Drain Selective Components Water Supply Water Supply Churning Brake Rinse Tank Rotation Brake Rinse Tank Rotation Water Supply Water Supply Tank Rotation Brake Spin Intermittent Spin Brake Rinse Waterfall Brake Spin...
  • Page 12 NA-FS80X1 / FS90X1 End Buzzer Brake Spin Intermittent Spin Drain Selective Components Keep and Churning Brake Rinse Tank Rotation Brake Rinse Tank Rotation Water Supply Brake Water Supply Tank Rotation Brake Spin Intermittent Spin Drain Selective Components Keep and Churning...
  • Page 13 NA-FS80X1 / FS90X1 End Buzzer Brake Spin Intermittent Spin Drain Selective Components Water Supply Churning Keep and Churning Brake Rinse Tank Rotation Brake Rinse Tank Rotation Water Supply Brake Water Supply Tank Rotation Brake Spin Intermittent Spin Drain Selective Components...
  • Page 14 NA-FS80X1 / FS90X1 End Buzzer Brake Drain Intermittent Spin Drain Brake Tank Rotation Inertia Water Supply Tank Rotation Inertia Tank Rotation Inertia Tank Rotation Water Supply Brake Water Supply Tank Rotation Brake Spin Intermittent Spin Drain Brake Tank Rotation Inertia...
  • Page 15 NA-FS80X1 / FS90X1 End Buzzer Brake Spin Intermittent Spin Drain Brake Inertia Tank Rotation Inertia Tank Rotation Inertia Tank Rotation Inertia Tank Rotation Water Supply Brake Water Supply Tank Rotation Brake Spin Intermittent Spin Drain Brake Inertia Tank Rotation Inertia...
  • Page 16 NA-FS80X1 / FS90X1 End Buzzer Brake Spin Intermittent Spin Drain Brake Inertia Tank Rotation Inertia Water Supply Tank Rotation Inertia Tank Rotation Inertia Tank Rotation Water Supply Brake Water Supply Tank Rotation Brake Spin Intermittent Spin Drain Brake Tank Rotation...
  • Page 17 NA-FS80X1 / FS90X1 Brake Brake Rinse Tank Rotation Rinse Tank Rotation Brake Brake Water Supply Water Supply and Rinse and Rinse Brake Brake Rinse Tank Rotation Rinse Tank Rotation Brake Brake Rinse Tank Rotation Rinse Tank Rotation Stir Stir Water Supply...
  • Page 18 NA-FS80X1 / FS90X1 End Buzzer Flapping Brake Spin Flapping Brake Spin Flapping Brake Spin End Buzzer Brake Brake Spin Spin Intermittent Spin Intermittent Spin Drain Drain Brake Brake Rinse Tank Rotation Rinse Tank Rotation Brake Brake Water Supply Water Supply...
  • Page 19 NA-FS80X1 / FS90X1 - 19 -...

  • Page 20: Installation

    NA-FS80X1 / FS90X1 6. INSTALLATION An Instruction Manual Extract 2 In the case of replacing an interior drainage hose. You can replace position of the interior drainage hose at the rear and the left side depending on a drainage place. Please do not take off the interior drainage hose of the cock side.
  • Page 21 NA-FS80X1 / FS90X1 6 Confirm Level Check a Level Meter Adjust Inclination horizon ● No need for adjustment Bubble (Front) ● Raise Back is high ● Install rubber sheet. Level Meter ■ In case of protrude greatly Right is high ●...

  • Page 22: Table Of Errors

    NA-FS80X1 / FS90X1 7. TABLE OF ERRORS 7.1 Service Check 1. Turn off power supply. Power 2. Hold [washing] and [water level] botton at the same time by one hand. 3. Turn on power supply. Water 4. Release the buttons as referred to above 2, 3 (Check A) volume 5.
  • Page 23 NA-FS80X1 / FS90X1 The number of pushing Check Check Indication Operation the water level button Sequence Contents Display a history Display [E] initialy, whenever [wash] button is pushed, of the abnormal it turns the last time (22L turns on) the time...

  • Page 24: Standard Self-Diagnose Functions (Abnormal Information)

    NA-FS80X1 / FS90X1 7.2 Standard Self-Diagnosis Function (Abnormal Information) ※ It displays automatically when it detected an operation mistake or an abnormality during operating. Then stop the operation. ※ The indication of the abnormality detection displays alphabet (U or H) and a number in turn.
  • Page 25 NA-FS80X1 / FS90X1 An abnormal A check procedure / A cancellation Display Part Detected Contents Contents Measures Method ※ Communication When communication control is • Breaking communication line or Pull a power plug out. line disconnection abnormal between a controller for connector contact error.

  • Page 26: Troubleshooting Of

    NA-FS80X1 / FS90X1 7.3 Troubleshooting of H25, H26 If abnormal indication [H25] and [H26] appeared, perform following trouble diagnosis and specify a trouble part. ● Output measurement point of each geared motor Blue 2 pin connector ① Brown white lead wire ②...

  • Page 27: Disassembly • Assembly Instruction

    NA-FS80X1 / FS90X1 8. DISASSEMBLY • ASSEMBLY INSTRUCTION Warning Warning ● Please make sure ● To connect the lead wire, use a solderless to pull out a power terminal and tighten it firmly. (Use a specified plug before part, regular bonding pliers) disassembly.

  • Page 28: Door Lock Switch

    NA-FS80X1 / FS90X1 8.2 Door Lock Switch Illustration Disassembly Procedure ● Necessary tool plus driver ● Replacement of door lock switch (1) Refer to procedure (1) to (4) [replacement for controller display]. (5) Take off panel A sheet (2 screws) Panel sheet A (6) Take off door lock, switch installation screw (2 pieces).

  • Page 29: Water Supply Valve • Bath Pump • Water Level Sensor • Lid Switch

    NA-FS80X1 / FS90X1 8.4 Water Supply Valve • Baht Pump • Water Level Sensor • Lid Switch Illustration Disassembly Procedure ● Necessary tool ・minus driver plus driver ● Replacement of water supply valve (1) Open the cover and take off cover hinge axis (each right and left side) ※...

  • Page 30: Bearings (Mechanical Motor)

    NA-FS80X1 / FS90X1 8.5 Bearings (Mechanical Motor) Illustration Disassembly Procedure ● Necessary tool ･ Plus driver ･ Hammerless flange nut turning tool (HW-25K) ･ Bearing installation nut turning tool (HW-18) ･ Ratchet box wrench (HW-35) ● Replacement of bearings (mechanical motor) (1) Take off top cover installation screw (2 pieces) at the back side.

  • Page 31: External Dimension Figure

    NA-FS80X1 / FS90X1 9. EXTERNAL DIMENSION FIGURE 599 (hanger part and hose external shape) Drainage hose (available to draw right and left) 41.5 (from body side) 558 (hanger part width) Adjustment part (1 part) 554 (body width) Cover (opened) Cover space...

  • Page 32: Circuit Diagram

    NA-FS80X1 / FS90X1 10. CIRCUIT DIAGRAM 10.1 Electric Circuit Diagram Part with mark is a safety part. Warning Please use specified part for replacment to maintain safety and performance. - 32 -...

  • Page 33: Controller Input • Output Measurement

    NA-FS80X1 / FS90X1 10.2 Controller input • Output Measurement ・ Re-confirm the following output level and resistance at the time of controller replacement. ・ Measure output level by tester while switching a load part ・ Value mentioned below may be changed depend on power supply voltage or an error of the tester.

  • Page 34: Parts Exploded View And Replacement Parts List

    NA-FS80X1 / FS90X1 11. PARTS EXPLODED VIEW AND REPLACEMENT PARTS LIST 11.1 Parts Exploded View : Part A A3.1 A19.1 - 34 -...

  • Page 35: Replacement Parts List : Part A

    Important safety notice : Components identified by mark have special characteristics important for safety. When replacing any of these components, use only manufacturer's specified part. 11.2 Replacement Parts List : Part A of NA-FS80X1 / NA-FS90X1 Parts List Model Country / Qty Ref.

  • Page 36: Parts Exploded View : B

    NA-FS80X1 / FS90X1 11.3 Parts Exploded View : Part B - 36 -...

  • Page 37: Replacement Parts List : Part B

    NA-FS80X1 / FS90X1 11.4 Replacement Parts List : Part B of NA-FS80X1 / NA-FS90X1 Parts List Model Country / Qty Ref. Part Name Part No. Safety Remark FS80X1 FS90X1 MAL DBD RBD INDO BODY A UNIT AXW001A7JP00 COLOUR : WHITE...

  • Page 38: Parts Exploded View : C

    NA-FS80X1 / FS90X1 11.5 Parts Exploded View : Part C - 38 -...

  • Page 39: Replacement Parts List : Part C

    NA-FS80X1 / FS90X1 11.6 Replacement Parts List : Part C of NA-FS80X1 / NA-FS90X1 Parts List Model Country / Qty Ref. FS80X1 FS90X1 MAL DBD RBD INDO INNER LID AXW02007GF00 LID STOPPER A AXW11416RX00 INNER LID,OUTER TUB COVER OUTER TUB COVER...

  • Page 40: Parts Exploded View : Packing Part

    ① Follow a procedure as left figure. Roll up and tuck the case sheet into an inner cover. ② Close a cover. 11.8 Replacement Parts List : Packing Part of NA-FS80X1 / NA-FS90X1 Parts List Model Country / Qty Ref.

  • Page 41: Detail Change Notice

    NA-FS80X1 / FS90X1 DETAIL CHANGE NOTICE REVISION ITEM NO. PAGE DETAIL REMARK JAN. 2012 ADD PICTURE OF NOISE FILTER PART ASSY SEPARATE ADD PART NAME & PART NO. FOR SALES SUPPLY MAR. 2013 ADD BALANCER PICTURE FOR SALES SEPARATE PART ADD PART NAME AND PART NO.

This manual is also suitable for:

Na-fs90x1

Table of Contents