How To Setup The Easy Rc - Philips **HFL5011T/12 Installation Manual

You can also use this RC for multi RC. More details can be found in the 'Professional settings' chapter.
You can program this RC in the same way as the guest RC.
2.1.6

How to setup the Easy RC

The RC can be used in both RC5 and RC6 mode, meaning that it can be used for all TV's. By default the
RC is in RC6 mode (for 301x/501x/701x TV's). You can change the RC to RC5 mode (for 28x9 TV's).

You can change the RC to RC5 mode by pressing 5 seconds "Home" and "Volume up" at the
same time.

You can change it back to RC6 mode by pressing 5 seconds "Mute" and "Channel up" at the
same time.
You can also use this RC for multi RC. More details can be found in the 'Professional settings' chapter.
You can program this RC by pressing 2 buttons at the same time for 5 seconds.
Below you can find a table how to match the TV settings and the settings as they can be used in the
guest RC for RC6:
Mode: Buttons combination:
Blue (default) "Home" and "Volume down"
Yellow "Home" and "Channel down"
Red "Back" and "Volume down"
Green "Back" and "Channel down"
0 "Home" and "Clock"
1 "Home" and "Subtitle"
2 "Home" and "Arrow up"
3 "Home" and "TV"
4 "Home" and "Arrow left"
5 "Home" and "OK"
6 "Home" and "Arrow right"
7 "Home" and "Back"
8 "Home" and "Arrow down"
9 "Home" and "Mute"
Below you can find a table how to match the TV settings and the settings as they can be used in the
guest RC for RC5:
Mode: Buttons combination:
Blue (default) "Home" and "Volume down"
Yellow "Home" and "Channel down"
Red "Back" and "Volume down"
Green "Back" and "Channel down"
Also note that this multi RC setting is stored permanently, so it will remember the setting even if the
batteries are removed from the RC.
- 8 -