Replacing Application Cards
Step 4
Holding the card by its ejector levers, gently slide the card out of the chassis by pulling the card toward you.
Caution:
chassis and could cause it to overheat. Make sure a card or a blanking panel is installed in every chassis slot at all times.
Step 5
Proceed to
Installing the Application
Important:
Memory Card on
Do not leave chassis slots uncovered for extended periods of time. This reduces airflow through the
Card.
If the card just removed from the chassis was an SMC, proceed to
SMCs.
Removing the Application Card ▀
Replacing the CompactFlash
ASR 5000 Installation Guide ▄
243