Main Body; Removing The Bottom Chassis; Removing The Front Chassis; Section 3 Disassembly - Kenwood KDC-202U Service Manual

3.1

Main body

3.1.1 Removing the Bottom chassis (See Fig.1)
(1) Disengage the 7 hooks a engaging the Bottom chassis.
(2) Slide the Bottom chassis backward to remove it.
hook a
hook a
3.1.2 Removing the Front chassis (See Fig.2)
(1) Disengage the 4 hooks b engaging both sides of the Front
chassis.
hook b
3.1.3 Removing the Electric unit (See Fig.3, 4 and 5)
(1) Remove the 1 screws A attaching the Rear bracket. (See
Fig.3)
(2) Remove the 2 screws B attaching both sides of the Top
chassis. (See Fig.4)
SECTION 3
DISASSEMBLY
hook a
Fig.1
Fig.2
A
Fig.3
Fig.4
(No.WA002<Rev.001>)8/20
(3) Remove the 3 screws C attaching the Electric unit. (See
Fig.5)
(4) Disconnect the board to board connector
ing the Main board and the CD mechanism. (See Fig.5)
3.1.4 Removing the CD mechanism (See Fig.6)
(1) Remove the 3 screws J attaching the CD mechanism.
D
3.1.5 Removing the Switch unit (See Fig.7)
(1) Remove the Volume knob.
(2) Remove the 4 screws E attaching the Rear cover.
(3) Disengage the 10 hooks c engaging the Rear cover.
E
B
CN502
C
CN502
Fig.5
D
Fig.6
E
c
c
E
Fig.7
connect-
D
c