Self-Diagnosis Function ···································· - Sony HVR-M10C Service Manual

1-2. SELF-DIAGNOSIS FUNCTION
1. SELF-DIAGNOSIS FUNCTION
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the LCD screen what to do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
Repaired by:
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
engineer
Note: The self-diagnosis display data will be kept even if the lithium battery (BT591 of LI-073 board) is removed.
HVR-M10C/M10E/M10J/M10N/M10P/M10U
LCD screen
C : 3 1 : 1 1
Blinks at 3.2Hz
C 3 1
Block
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
2. SELF-DIAGNOSIS DISPLAY
When problems occur while the unit is operating, the counter of
the LCD screen consists of an alphabet and 4-digit number, which
blinks at 3.2Hz. This 5-character display indicates the "repaired
by:", "block" in which the problem occurred, and "detailed code"
of the problem.
1 1
Detailed Code
Refer to page 1-4.
Self-diagnosis Code Table.
1-3
ENGLISH JAPANESE
ENGLISH JAPANESE