Epson Expression 1640XL Manual page 14

If your PC has a SCSI board up and running, connect the scanner as described in the
next section.
Note:
You will need to install the SCSI driver that is normally included with Windows 2000,
98, 95, or NT (see your system documentation for instructions), or the driver described
in the SCSI board installation documentation.
For Macintosh users:
Your Macintosh may or may not have SCSI ports, depending on which model you own.
If you have a Macintosh that does not have a SCSI port, you need to install a SCSI
board and driver. Follow the directions below to connect your scanner and computer.
Note:
The latest driver may be available for download from the Web site of the SCSI board
manufacturer.
Setting the SCSI ID number
scanner's default SCSI ID number is 2.
The SCSI ID rotary switch is
located at the back of the
If you add the scanner to a system in which one of your SCSI devices already has a
SCSI ID of 2, change the ID number to an unused number using the rotary switch. See
the table below as a guide.
ID Availability
0 Not available for Macintosh
Not recommended for Win-
dows
1 Not recommended
2
14
scanner.
Description
Used for hard disk
Usually used for hard disk
Usually used for hard disk
Factory setting of the scanner
Connecting the Scanner to Your Computer