Epson Expression 1640XL Manual page 15

3
4
5
6
7 Not available for Macintosh
May not be available for Win-
c
dows
Caution:
Do not set the SCSI ID to an ID number that is already assigned to another
device otherwise the computer, scanner, and other devices will not operate
properly.
Setting the terminator switch
The scanner has a built-in terminator, which allows SCSI devices to communicate
properly with each other. You may need to change the terminator switch setting
according to your computer system.
Note:
Do not use an external terminator.
The terminator switch is
located at the back of the
scanner.
Connecting the Scanner to Your Computer
Not available if your Macintosh
has a built-in CD-ROM
Always used for the Macintosh
itself
Usually used for the SCSI board
15