Room Status Control - Panasonic KX-NS1000 Operating Manual

1.3.60 Room Status Control

1.3.60 Room Status Control
In a hotel-type environment, an extension assigned as a hotel operator can check guests into
or out of rooms and confirm that the room is clean and ready for the next guest by changing
the room status of the corresponding extension. The hotel operator's extension must have
flexible buttons assigned as Check-in, Check-out, and Cleaned-up buttons, and a DSS button
for each extension that will be used in a guest room.
•
The hotel operator must be using a 6-line display PT to use the Room Status Control features.
•
While in Room Status Control mode:
a.
The hotel operator's extension can only check extensions in/out and ready/not ready. All
other operations will be ignored.
b.
The light of each DSS button shows the room status of the corresponding extension as
follows:
Off: Checked-out and Ready
Flashing Red: Checked-out and Not Ready
Red on: Checked-in
[Light Pattern Example: Checked-in Mode]
c.
The lights of other buttons may not show their normal display.
d.
The hotel operator's extension is considered to be busy. Callers to that extension will
hear a busy tone.
134 Operating Manual
DSS button
Check-in button
Check-out button
Cleaned-up button
Room101
Rooms 101 and 103
are currently in
Room102
checked-in status.
Room103
Room104
Room105
Document Version 2013-04