Room Status Control - Panasonic KX-NS700 Feature Manual

•
On extensions using KX-UT series SIP phones, only the TRG1 setting for CO line Call/Hold Recall is
valid.
•
For the One-numbered Extension feature, the ring tone pattern for the main extension and the sub
extension can be set individually. (→ 14.1.5 One-numbered Extension)
•
For KX-UT series SIP phones, changes to the ring tone pattern are applied after the telephone is
restarted.
PC Programming Manual References
10.8.1 PBX Configuration—[2-8-1] System—Ring Tone Patterns—Call from CO—Ring Tone Pattern Plan 1–
8
10.8.2 PBX Configuration—[2-8-2] System—Ring Tone Patterns—Call from DOORPHONE—Ring Tone
Pattern Plan 1–8
10.8.3 PBX Configuration—[2-8-3] System—Ring Tone Patterns—Call from Others—Extension—Ring Tone
Pattern Plan 1–8
10.9 PBX Configuration—[2-9] System—System Options—Option 1—PT Operation—PT Ring Off Setting
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
→Option 1—Ring Pattern Table
→Option 6—ICM Tone
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button—Optional Parameter
(Ringing Tone Type Number) (for Loop CO, Single CO, Group CO, ICD Group, SDN)
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 1—Ring
Pattern Table
Feature Manual References
23.1 Capacity of System Resources
Operating Manual References
3.1.4 Customizing the Buttons―To specify the ringing tones for each CO, ICD Group, PDN, SDN, or
INTERCOM button (DPT/IP-PT only)

17.1.3 Room Status Control

Description
A proprietary telephone (PT) with a 6-line display designated as the hotel operator extension can be used to
view and set the Check-in/Check-out/Cleaned-up (Ready or Not Ready) status of guest rooms associated
with extensions.
Any wired extension can be used as a room extension without special programming.
Flexible buttons on the hotel operator's extension can be set as Room Status Control buttons. The 3 types
of Room Status Control buttons are as follows:
•
Check-in
Switches the status of selected room extensions from Check-out to Check-in.
Remote Extension Dial Lock is turned off, allowing calls to be made from the extension.
•
Check-out
Switches the status of selected room extensions from Check-in to Check-out.
Room extension data, such as Timed Reminder or Last Number Redial data, is cleared, and Remote
Extension Dial Lock is turned on, restricting some calls. This can be useful to prevent the room extension
from being used when no guest is checked in.
Document Version 2017-06
17.1.3 Room Status Control
Feature Manual 327