Incoming Call Features - Panasonic KX-NS700 Feature Manual

While searching for an idle extension within an idle extension hunting group, any extension that has set
FWD—All Calls or DND feature will be skipped, and the call will go to the next extension in the group.
PC Programming Manual References
11.6 PBX Configuration—[3-6] Group—Extension Hunting Group
11.6.1 PBX Configuration—[3-6] Group—Extension Hunting Group—Member List
PT Programming Manual References
[680] Idle Extension Hunting Type
[681] Idle Extension Hunting Group Member
Feature Manual References
5.1.13 DND (Do Not Disturb)
7.1.7 FWD (Call Forwarding)
23.1 Capacity of System Resources

10.1.11 INCOMING CALL FEATURES

Description
Each CO line functions as either a public line or a private line. Private lines are used to connect different
PBXs and form a private network (→ 15.1.13 PRIVATE NETWORK FEATURES), while public lines connect
a PBX to a public network, i.e., the telephone company. Certain PBX features are available depending on
the networking type (public or private) of each CO line.
1.
Networking Type Used by Each CO Line
Each CO line port (channel) of a CO line card or the mother board is assigned a port (channel) type
which determines the CO line's networking type—public or private.
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings—DIL—Trunk Property
Card
Type
Mother Board
(V-IPGW)
Mother Board
(V-SIPGW)
LCOT
PRI
2.
Distribution Method
Each public CO line port (channel) can use a different method of directing calls to their destinations as
they are received.
Distribution Method
Direct In Line (DIL)
Document Version 2017-06
Port/Channel/
Protocol Type
Public
H.323
SIP
CO
Extension
QSIG-Master
QSIG-Slave
Directs a call to a preprogrammed destination,
such as an operator, based on the CO line
carrying the call.
10.1.11 INCOMING CALL FEATURES
Networking Type
Private
Description
: Default
: Available
Details in
→ 5.1.8 DIL (Direct
In Line)
Feature Manual 197