It is not possible to temporarily change the called party's preset call receiving method when making a call
using a Primary Directory Number (PDN) button or Secondary Directory Number (SDN) button (→
15.1.5 PDN (Primary Directory Number)/SDN (Secondary Directory Number) Extension).
•
Tone after Dialing
After dialing an extension number, a user will hear one of the following:
Type
Ringback Tone
Confirmation Tone
Busy Tone
DND Tone
PC Programming Manual References
10.6.3 PBX Configuration—[2-6-3] System—Numbering Plan—B/NA DND Call Feature—Alternate Calling -
Ring / Voice
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
→Main—Extension Number
→Main—Extension Name
→Option 3—Intercom Call by Voice
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Main
→Extension Number
→Extension Name
PT Programming Manual References
[003] Extension Number
[004] Extension Name
Feature Manual References
7.1.3 Flexible Buttons
Operating Manual References
1.2.1 Making Calls
1.3.3 Alternate Calling—Ring/Voice
1.4.3 Directories
3.1.2 Personal Programming
10.1.15 Internal Call Block
Description
Internal calls can be restricted based on the Class of Service (COS) assigned to the caller and to the called
party.
Document Version 2017-06
Indicates the called party is being called.
Indicates the called party has set voice-calling.
Indicates the called party is busy.
Indicates the called party has set DND.
10.1.15 Internal Call Block
Description
Feature Manual
205