Panasonic KX-NS700 Feature Manual page 250

15.1.4 PC Programming
Method
Using a modem (RMT card)
Using an ISDN TA interface
(64 kbps) through an ISDN
CO Line
There are three levels of authorization for programming the PBX, where each level controls which settings
the programming is allowed to access and change. The three levels are as follows:
Level
Installer
User
(Administrator)
User (User)
Conditions
•
Each account is assigned a password that is required to log in.
•
Users can be added using the Add User Wizard.
CAUTION
To the Administrator or Installer regarding account passwords
1.
Please provide all system passwords to the customer.
2.
To avoid unauthorized access and possible abuse of the PBX, keep the passwords secret, and
inform the customer of the importance of the passwords, and the possible dangers if they become
known to others.
3.
The PBX has no passwords set initially. For security, select an installer password as soon as the
PBX system is installed at the site.
4.
Change the passwords periodically.
5.
It is strongly recommended that passwords of 10 numbers or characters be used for maximum
protection against unauthorized access.
250 Feature Manual
An RMT card must be installed. The floating extension number of
the analog remote maintenance must be assigned (default: 599).
PC programming, using a telephone connected in parallel with the
modem, can be done in the following ways:
•
Direct Access
Dial the DIL/DID number whose destination is the floating
extension number of the analog remote maintenance.
•
Through DISA
Dial the floating extension number of the analog remote
maintenance using the DISA feature. (→ 5.1.10 DISA (Direct
Inward System Access))
•
Call Transfer
Call an extension (probably the operator), and request a transfer
to the floating extension number of the analog remote
maintenance. (→ 4.1.10 Call Transfer)
The floating extension number of the ISDN remote maintenance
must be assigned (default: 699), and dial the DIL/DID number
whose destination is the floating extension number of the ISDN
remote maintenance. The RMT card is not required for this method.
This method is available only when an user-supplied ISDN TA that
supports CAPI is used.
Description
For dealers and system installers
For on-site managers
For end users
Description
Number of Accounts/Network
492
Document Version 2017-06
1
8