Unified Messaging-Remote Time Service Set; Unified Messaging-Service Group; Unified Messaging-Simplified Tutorial - Panasonic KX-NS700 Feature Manual

20.1.70 Unified Messaging—Remote Time Service Set
•
Extensions assigned as operators can be called by dialing [0], however, when setting this feature the
extension number (not "0") must be specified.
PC Programming Manual References
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Remote Call/Automatic Login/Direct
Service
21.1 UM Configuration—[2] Class of Service
Operating Manual References
Subscriber Operation
1.6.5 Transferring Calls—Remote Call Forwarding
Manager Operation
2.2.1 System Manager Features—Setting Class of Service (COS) Parameters
2.2.2 Message Manager Features—Remote Call Forwarding Set
20.1.70 Unified Messaging—Remote Time Service Set
Description
Allows the System Manager to program his or her extension from a remote location in order to change the
PBX's time service mode (day/night/lunch/break).
Operating Manual References
Manager Operation
2.2.1 System Manager Features—Remote Time Service Mode Setting
20.1.71 Unified Messaging—Service Group
Description
Is a group of parameters that determine how incoming calls will be handled. 64 different Service Groups can
be configured; one Service Group can be assigned to each port and each trunk group.
PC Programming Manual References
10.4 PBX Configuration—[2-4] System—Week Table
22.1 UM Configuration—[3-1] UM Extension / Trunk Service—Service Group
Feature Manual References
19.1.3 Time Service
Operating Manual References
Manager Operation
2.1.6 Time Service Mode Control
20.1.72 Unified Messaging—Simplified Tutorial
Description
If enabled in a subscriber's COS settings, the tutorial that guides the subscriber through setting up his or her
mailbox is simpler and takes less time to complete than the standard tutorial.
410 Feature Manual Document Version 2017-06