Panasonic KX-NS700 Feature Manual page 2

Introduction
Introduction
About the Feature Manual
The Feature Manual is designed to serve as an overall reference describing the features of the Panasonic
IP-PBX. It explains what the PBX can do, as well as how to obtain the most of its many features and
facilities.
The Feature Manual is divided into the following sections:
Section 1, For Your Safety
Provides important information about operating the PBX safely and securely.
Sections 2 to 22, Features and Configurations
Describes the call handling, system configuration and administration features of the PBX.
Section 23, Appendix
Provides tables listing capacity of system resources, exclusive features for each PBX model, tone and ring
tone tables, and the revision history of this Feature Manual.
Functional Limitation
The feature (explained below) that displays the registered name on the second line of a display PT's LCD is
supported by the following models only:
•
KX-NT543 / KX-NT546 / KX-NT553 / KX-NT556 / KX-NT560
•
KX-DT543 / KX-DT546
If a name is registered in the Personal Speed Dialing Directory or System Speed Dialing Directory, it is
displayed on the second line of a display PT's LCD when you make a call to that directory entry in one of the
following ways:
1.
When you make a CO line call using that directory.
2. When you use the REDIAL button to redial the number dialed in 1.
3. When you use the Outgoing Call Log to redial the number dialed in 1.
This limitation applies to the following manuals and chapters.
Feature Manual
•
17.1.1 Redial, Last Number
•
18.1.10 Speed Dialing, Personal
•
18.1.11 Speed Dialing, System
Operating Manual
•
1.4.2 Call Log, Outgoing
•
1.4.3 Directories
Mobile Softphone (KX-UCMA) will be supported at PBX software version 005.00000 and later.
Operation of the KX-NTV series depends on the PBX software file version and the firmware version of the
KX-NTV series.
Video feeds cannot be displayed on KX-HDV series SIP phones in the following cases:
•
When an incoming call is received through an incoming call distribution group
•
During a conference call
2 Feature Manual Document Version 2017-06