Sip (Session Initiation Protocol) Extension - Panasonic KX-NS700 Feature Manual

18.1.2 SIP (Session Initiation Protocol) Extension

→IP Extension / IP-CS—NAT - MGCP Server Port No. for IP-CS
→IP Extension / IP-CS—Keep Alive Packet Type
→IP Extension / IP-CS—Keep Alive Packet Type for IP-CS
→IP Extension / IP-CS—Keep Alive Packet Sending Interval Time (s)
→IP Extension / IP-CS—NAT - FTP Server Port No.
→SIP Extension / UT Extension—NAT - SIP Proxy Server Port No.
→UT Extension—NAT - CWMP Server (HTTP) Port No.
→UT Extension—NAT - CWMP Server (HTTPS) Port No.
→UT Extension—NAT - CWMP Server (HTTP) Port No. for Network Survivability
→UT Extension—NAT - CWMP Server (HTTPS) Port No. for Network Survivability
→UT Extension—NAT - SIP-MLT Data Download Server (HTTP) Port No.
→UT Extension—NAT - SIP-MLT Data Download Server (HTTPS) Port No.
→UT Extension—NAT - NTP Server Port No.
→UT Extension—Keep Alive Packet Type
→UT Extension—Keep Alive Packet Sending Interval Time (s)
→UT Extension—PERIODIC Ability
→UT Extension—PERIODIC Packet Sending Interval Time (s)
→Option—NAT - RTP IP Address
→Option—NAT - SIP Proxy Server IP Address
→Option—NAT - CWMP Server IP Address
→Option—NAT - CWMP Server IP Address for Network Survivability
→Option—NAT - NTP Server IP Address
9.14 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-IPEXT—Remote Place (Location /
P2P)
9.16 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-SIPEXT—Remote Place (Location /
P2P)
9.18 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-IPCS—Remote Place
9.20 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-UTEXT—Remote Place
18.1.2 SIP (Session Initiation Protocol) Extension
Description
This PBX supports the connection of SIP supported IP telephones (hardphones and softphones). SIP
extensions make and receive calls using Internet Protocol (IP).
For information about SIP extension compatibility with feature numbers, see 7.1.4 Flexible Numbering/Fixed
Numbering.
For more information about Panasonic KX-UT series SIP phones, see 11.1.1 KX-UT Series SIP Phones.
For more information about Panasonic SIP phones (P-SIP), see 15.1.29 P-SIP (Panasonic SIP Phones).
Below are the features supported by SIP extensions:
•
Absent Message (→ 2.1.1 Absent Message)
•
Account Code Entry (→ 2.1.2 Account Code Entry)
•
Automatic Route Selection (ARS) (→ 2.1.3 ARS (Automatic Route Selection))
•
Call Forwarding (FWD) (→ 7.1.7 FWD (Call Forwarding))
•
Call Hold (→ 4.1.4 Call Hold)
•
Call Park (→ 4.1.7 Call Park)
*1
•
Call Pickup (→ 4.1.8 Call Pickup)
•
Call Transfer with Announcement (→ 4.1.10 Call Transfer)
•
Call Waiting Tone (→ 4.1.12 Call Waiting Tone)
•
COLR/CLIR/CLIP/COLP (→ 4.1.15 CLIP (Calling Line Identification Presentation))
334 Feature Manual Document Version 2017-06