Panasonic KX-NS700 Feature Manual page 96

Hybrid ip-pbx
Hide thumbs Also See for KX-NS700:
Table of Contents

Advertisement

5.1.10 DISA (Direct Inward System Access)
Intercept Routing
No
(Busy Tone /
DND Tone
Continuation
time expires)
The call is disconnected.
The call is routed to
the intercept destination.
(Intercept Routing DND)
G
DISA Intercept Routing—No Dial
If the caller fails to dial any digits within a preprogrammed time period (DISA 1st Dial Time for Intercept)
after hearing the outgoing message (OGM), one of the following can be selected through system
programming:
a.
Disable: The call will be terminated.
b.
Operator: The call will be redirected to the operator.
c.
AA-0, AA-9: The call will be redirected to the destination assigned to that AA number.
→ 10.3 PBX Configuration—[2-3] System—Timers & Counters—DISA / Door / Reminder / U. Conf—DISA—
No Dial Intercept Timer (s)
→ 13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System—Option 1—DISA
Intercept—Intercept when No Dial after DISA answers
DISA Built-in Automated Attendant Number (DISA AA Service)
After listening to the outgoing message (OGM), the caller may dial a single digit (DISA AA number). The
destination for each DISA AA number can be assigned for each message. It is also possible to assign other
DISA floating extension numbers as the destination (Multistep DISA AA Service).
If the caller dials a second digit within a preprogrammed time period (DISA 2nd Dial Time for AA), the DISA
AA service is not employed.
13.3.2 PBX Configuration—[5-3-2] Optional Device—Voice Message—DISA Message—1 Digit AA
Destination (Extension Number)—Dial 0–9
10.3 PBX Configuration—[2-3] System—Timers & Counters—DISA / Door / Reminder / U. Conf—DISA—
2nd Dial Timer for AA (s)
Outgoing Message (OGM)
When a call arrives on a DISA line, a prerecorded DISA message will greet and guide the caller.
Any extension assigned as the manager can record outgoing messages (OGMs). (→ 14.1.2 OGM (Outgoing
Message))
96
Feature Manual
Continued from previous page
What method is assigned
for DISA Intercept
Routing DND?
Busy tone
Does the caller
press
while hearing a busy
tone (Call Retry)?
Yes
The message for
the DND mode is
sent to the caller.
A
Continued from previous page
Is an Intercept
Routing Busy destination
OGM
Is a DISA Busy
Message assigned?
The message for
busy is sent to the
caller.
F
The call is disconnected.
Yes
assigned?
The call is routed to
the intercept destination.
No
(Intercept Routing Busy)
No
Yes
Busy tone
F
Does the caller
No
press
while hearing a busy
tone (Call Retry)?
(Busy Tone /
DND Tone
Continuation
time expires)
Yes
A
Document Version 2017-06
G

Advertisement

Table of Contents
loading

Table of Contents