Panasonic KX-NS700 Feature Manual page 97

[Programming Example]
Outgoing
Message Floating
(OGM) Extn. No.
No.
01
02
:
→ 13.3.2 PBX Configuration—[5-3-2] Optional Device—Voice Message—DISA Message—Floating Extension Number
*1
The default floating extension number depends on the value specified for Numbering Plan in Easy Setup.
→ 2.1.4 Easy Setup Wizard
→ 13.3.2 PBX Configuration—[5-3-2] Optional Device—Voice Message—DISA Message—1 Digit AA Destination (Extension
*2
Number)—Dial 0–9
→ 13.3.2 PBX Configuration—[5-3-2] Optional Device—Voice Message—DISA Message—Busy / DND Message No.
*3
DISA Security Mode and Available Features
If the DISA AA service is not employed, the caller may access the PBX features by entering the feature
numbers. To prevent others from accessing the PBX features, it is possible to assign DISA security.
→ 13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System—DISA Security—
DISA Security Mode
The features available depend on the preprogrammed DISA security mode as follows:
Security Mode
All Security
CO Line Security
No Security
ü: Available
If CO line call is available, Account Code Entry (→ 2.1.2 Account Code Entry) is also available.
*1
Note
DISA AA service and Operator Call (→ 14.1.7 Operator Features) are available for any security mode.
Security Mode Override by Verification Code Entry
If the caller performs Verification Code Entry (→ 21.1.1 Verification Code Entry) while hearing a DISA
message, the security mode can be temporarily changed to No Security mode.
Entry method:
Verification Code Entry feature number +
After changing mode, the new mode remains in force for the duration of the call.
DISA Intercept Routing—Busy
If the first destination called by the outside party is busy, the call is redirected as follows:
a.
The call is redirected to the Intercept Routing—Busy destination assigned to the first destination.
b.
If an Intercept Routing—Busy destination is not assigned to the first destination and a prerecorded
DISA Busy Message is assigned, the caller will hear the DISA Busy Message.
c.
If neither an intercept destination nor a DISA Busy Message is assigned, the caller will hear a busy
tone.
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Intercept Destination
—Intercept Destination—When Called Party is Busy
DISA Intercept Routing—DND
Document Version 2017-06
*1
0 1
501 100 301
502
: : :
Intercom
Call
ü
ü
Automated Attendant No.
2 3 4 5
200 103 202 101
: : : :
TIE Line Call
Without PBX Code
ü
ü
+ verification code + verification code PIN
5.1.10 DISA (Direct Inward System Access)
*2
6 7 8
102 400 104 205
: : :
With PBX Code
ü
Feature Manual
Busy/DND
Message
9
No.
*3
04
05
: :
CO Line Call
ü
*1
97