Panasonic KX-NS700 Feature Manual page 43

Feature
Calling Line Identification
Presentation (CLIP)
2.
Caller ID-Related Features
Feature
Calling Line Identification
(CLI) Distribution
Incoming Call Log
3. Automatic Caller ID Number Modification
When a call is received, the PBX can automatically modify the caller's telephone number according to a
preprogrammed set of rules (Caller ID Modification Table). This modified number will be automatically
stored in the extension's Incoming Call Log, allowing the extension user to make a call to this number
later without worrying about CO Line Access numbers, area codes, etc.
Each trunk group can be assigned a modification table. Each table has ten formulas for modifying local/
international numbers, and one formula for modifying long distance numbers. When a call is received,
the PBX compares the received telephone number to the area codes programmed under "Local/
International Call Data" first. If a match is not found, the telephone number will be modified according to
the method programmed under "Long Distance Code".
After the caller's number is modified by the Length of Digits Modification Tables or CLIP Modification
Tables, the PBX checks the leading digits of the modified number for an area code programmed in the
Caller ID Modification Table assigned to that trunk group. For more information, refer to 11.1.3 PBX
Configuration—[3-1-3] Group—Trunk Group—Caller ID Modification—Leading Digits in PC
Programming Manual.
[Programming Example: Caller ID Modification]
<Table Selection>
Trunk
Modification
Group No.
1
2
Document Version 2017-06
Receives caller information sent from the
telephone company over ISDN lines.
Caller ID information received by the PBX is used
to direct calls from specific callers to specific
destinations. The caller's telephone number and a
destination must be assigned in the System
Speed Dialing Table.
Caller information is automatically recorded in the
call log of the extension which received the call.
This information can be used to view a record of
incoming calls or make calls to any number in the
call log.
<Modification Table>
Table
1 Modification Table 1
3
Local/International
Call Data 1
Local/International
Call Data 2
Local/International
Call Data 10
Long Distance
Code Data
Description
Description
Area Code Removed No. of Digits Added No.
3
212
011 3
[Not
0
programmable]
4.1.3 Caller ID
Details in
–
Details in
→ 4.1.14 CLI
(Calling Line
Identification)
Distribution
→ 4.1.5 Call
Log, Incoming
0
001
0
Feature Manual 43