Group Features - Panasonic KX-NS700 Feature Manual
Hybrid ip-pbx
Hide thumbs
Also See for KX-NS700:
- Feature manual (580 pages) ,
- User manual (394 pages) ,
- Operating manual (362 pages)
Table of Contents
Advertisement
8.1 G
8.1 G
8.1.1 GROUP FEATURES
Description
This PBX supports various types of groups.
1.
Trunk Group
CO lines can be grouped into trunk groups based on carrier, CO line type, etc. Several settings can be
assigned on a trunk group basis. All CO lines belonging to a trunk group follow the programming for
that trunk group.
→ 11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings
→ [402] LCOT Trunk Group Number
Each CO line can belong to only one trunk group. CO lines are assigned to a trunk group based on
their port numbers (for LCOT, PRI, and SIPGW cards).
2.
Extension User Group
Extensions can be grouped into extension user groups. Extension user groups then compose the
following groups:
a.
Tenant (→ 19.1.2 Tenant Service)
b.
Call Pickup Group (See below.)
c.
Paging Group (See below.)
Every extension must belong to one extension user group and cannot belong to more than one
extension user group.
→ 11.2 PBX Configuration—[3-2] Group—User Group
→ [603] Extension User Group
Assignable Extensions: Proprietary telephone (PT)/single line telephone (SLT)/portable station
(PS)/SIP Extension
[Example]
Extension User
Group 1
Extn. 100 Extn. 101
Call Pickup Group
Using the Group Call Pickup feature, extensions can answer any calls within the call pickup group to
which they belong. One extension user group can belong to several call pickup groups. (→ 4.1.8 Call
Pickup)
→ 11.3 PBX Configuration—[3-3] Group—Call Pickup Group
→ 11.3.1 PBX Configuration—[3-3] Group—Call Pickup Group—All Setting
→ [650] Extension User Groups of a Pickup Group
154
Feature Manual
Extension User
Extension User
Group 2
Group 3
Extn. 102 Extn. 103
Extn. 104 Extn. 105
Extension User
Group 4
Extn. 106 Extn. 107
Document Version 2017-06
Advertisement
Table of Contents
