Incoming Call Features; Incoming Trunk Call Features; Incoming Trunk Call Features-Summary - Panasonic KX-TDA15 Features Manual

1.1 Incoming Call Features

1.1 Incoming Call Features
1.1.1

Incoming Trunk Call Features

1.1.1.1 Incoming Trunk Call Features—SUMMARY
Description
Incoming calls via a trunk (public line) are distributed to their destinations according to one of several
distribution methods.
1.
Available Networking Type for Each Optional Trunk Card Type
Each trunk port of an optional trunk card can be assigned a networking type: Public, Private, or VPN
(Virtual Private Network).
→ 3.16.2 [10-2] DIL Table & Port Settings—DIL—Trunk Property
Trunk Card Type
LCOT
BRI
IP-GW
SIP-GW
*: Enable (default);
: → 1.26.1 TIE Line Service
*1
: → 1.26.3 Virtual Private Network (VPN)
*2
2.
Distribution Method
One of the following methods can be assigned to each trunk port:
Direct In Line (DIL)
16 Feature Guide
Channel Type
—
CO
Extension
QSIG-Master
QSIG-Slave
—
—
: Enable
Method
Directs a call to a preprogrammed single destination (e.g., the
operator).
→ 1.1.1.2 Direct In Line (DIL)
Networking Type
Public (DIL/DID/
Private (TIE)*
DDI/MSN)
*
*
*
Description & Reference
Virtual Private
1
Network (VPN)*
*
*
*
2