Panasonic KX-TDA15 Features Manual page 282

1.22 Administrative Information Features
→ 3.17.1 [11-1] Main—RS-232C—Communication—Parity Bit
→ [800] RS-232C Parameter—Parity Bit
e)
Stop Bit Length: A stop bit code indicates the end of a bit string which composes a character.
Select an appropriate value depending on the requirements of the PC or printer.
→ 3.17.1 [11-1] Main—RS-232C—Communication—Stop Bit
→ [800] RS-232C Parameter—Stop Bit Length
• If a call is transferred to an ICD group using Automatic Transfer, the condition code "TR" will not be
recorded on SMDR (→ 1.11.1 Call Transfer).
• Host PBX Access Code
The dialled number including the Host PBX Access code will be recorded on SMDR only if the modified
number setting is selected in the ARS setting for SMDR.
• When a Host PBX Access code is assigned to a trunk group, calls to extensions of the host PBX are
not recorded on SMDR.
• A Host PBX Access Code can be used to record only long distance calls on SMDR when a trunk port
is connected directly to the telephone company (not a host PBX). This is allowed when the long
distance code (e.g., "0") is assigned as the Host PBX Access code. All local calls (e.g., calls that do not
require a "0" to be dialled first) are treated as extensions of the telephone company and do not get
recorded on SMDR, because in this case this PBX recognises the telephone company as the host PBX.
Therefore, only long distance calls are recorded on SMDR.
Installation Manual References
2.9.1 Connection of Peripherals
Programming Manual References
PC Programming Manual
3.8.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—Dial—Analogue CO Call Duration Start
3.8.11 [2-7-1] Class of Service—COS Settings—CO & SMDR—Outgoing CO Call Printout (SMDR)
3.12.9 [6-8] Hotel & Charge
→ Main—SMDR for External Hotel Application 2—Printing Message 1–8
→ Charge—Charge Options—Currency
3.17.1 [11-1] Main
→ SMDR
→ SMDR Options
→ RS-232C
PT Programming Manual
[800] RS-232C Parameter—New Line Code
[800] RS-232C Parameter—Baud Rate
[800] RS-232C Parameter—Word Length
[800] RS-232C Parameter—Parity Bit
[800] RS-232C Parameter—Stop Bit Length
[802] SMDR Page Length
[803] SMDR Skip Perforation
[804] SMDR Outgoing Call Printing
[805] SMDR Incoming Call Printing
282 Feature Guide