Music On Hold - Panasonic KX-TDA15 Features Manual

1.12.4 Music on Hold

Description
Music can be played to a party that has been put on hold. The following music sources are available:
a)
Internal music source
b)
External music source
c)
Cyclic tone
Music Source Assignment
Separate music sources can be assigned for the Music on Hold and the BGM features.
Only one external music port is available. If BGM is selected, it is possible to select whether external music
port, internal music port 1, or internal music port 2 is assigned to BGM.
Conditions
• Hardware Requirement: User-supplied music source (when an external music source is assigned)
• Volume Control
It is possible to change the volume of an internal and/or external music source.
• Each tenant can select a music source to use for Music on Hold. The type of call determines which
tenant's music source is used, as follows:
Incoming Intercom Calls/
Outgoing Calls
Incoming Trunk Calls
Installation Manual References
2.9.1 Connection of Peripherals
Programming Manual References
PC Programming Manual
3.8.3 [2-2] Operator & BGM
→ BGM and Music on Hold—Music Source of BGM (KX-TDA30 only)
→ BGM and Music on Hold—Music on Hold
3.8.19 [2-11-1] Audio Gain—Paging/MOH
→ MOH—MOH (Music On Hold) (KX-TDA30 only)
PT Programming Manual
[710] Music Source Selection for BGM
[711] Music on Hold
Feature Guide References
2.2.3 Tenant Service
Type
Selected based on the tenant setting to which the extension
user belongs.
Selected based on the tenant setting of the distribution method
(DIL/DID/DDI/MSN).
Music Source
1.12 Holding Features
Feature Guide 167