Epson SureColor P5000 User Manual page 168

LCD screen message Condition/solution
Cleaning Error Select Yes. Replace the maintenance tank (in the ink cartridge compartment)
with a new one to continue cleaning.
Not enough empty
space in maint box 1.
Continue cleaning?
Nozzle Clog Detected
Not enough empty
space in maint box 1.
Continue cleaning?
Ink Too Low To Clean This message may be displayed when Yes is selected after a cleaning error
or nozzle clog error. Replace any ink cartridges with low ink with new ones.
Replace ink cartridge.
The cartridge being
used can be installed
again for printing.
Black Ink Error The type of black ink that is set on the printer and in the printer driver does
not match. Press the
Black ink does not
the printer driver to continue printing. This takes approximately 3 minutes,
match print job.
and some extra black ink is consumed. Do not switch the black ink unless
To cancel printing, press
necessary.
pause/cancel
button.
To change black ink to
print, press Black
ink/maintenance button.
Command Error The printer driver sent an invalid or incorrect command to the printer.
Check driver settings.
Press the
the driver you are using supports your product.
button to switch to the black ink type specified in
pause/cancel button and select Job Cancel. Make sure that
168