Cutting Roll Paper Manually; Printing Trim Lines - Epson SureColor P5000 User Manual

Cutting Roll Paper Manually

You can keep your prints on the roll until you manually cut them.
Note: The built-in cutter may not be able to cut some types of media. In addition, heavy or thick media
types may damage or dull the cutter, requiring more frequent replacement.
1. Press the
2. Press the down arrow button to select Roll Paper/No Cut, and press the OK button.
3. Run your print job.
4. Press the
Note: If the paper cannot be cut by the built-in cutter, press the
clear of the printer, then cut the print by hand.
Parent topic:

Printing Trim Lines

When you disable the Auto Cut setting, you can print a trim line (page line) between print jobs as a guide
for manual cutting.
1. Before you print, press the Menu button.
2. Press the down arrow button to select Paper and press the right arrow button.
3. Select Roll Paper Setup and press the right arrow button.
4. Select Print Page Line and press the right arrow button.
5. Press the up or down arrow button to select On.
6. Press the OK button to save the setting.
A check mark appears next to the setting.
7. Press the
8. Run your print job.
Parent topic:
Related references
Paper Menu Settings
paper source button.
paper cut button.
Cutting Roll Paper
pause/cancel button to exit the menu.
Cutting Roll Paper
paper feed button until your print is
29