D-Link DIR-825/AC User Manual page 142

DIR-825/AC Wireless AC1200 Dual Band Gigabit Router with
3G/LTE Support and USB Port
User Manual
Parameter
Enable Wireless
Broadcast wireless
network
MBSSID
BSSID
Enable guest network
Hide Access Point
Network name (SSID)
Country
Channel
The checkbox enables Wi-Fi connections in the 2.4GHz. If you want
to disable your WLAN in this band, deselect the checkbox.
If the checkbox is not selected, devices cannot connect to the router's
WLAN in the 2.4GHz band (or to the selected part of the network).
Upon that the router can connect to another access point as a
wireless client.
To split the network into two parts in the 2.4GHz band, select the
value 2 from the drop-down list. By default, the wireless network is
not split (the Disabled value is selected from the list).
For every part of the WLAN you can specify a name (SSID),
security settings, and rules for MAC filtering. To specify these
values, select the needed part from the BSSID drop-down list and
click the Apply button. Then proceed to the relevant page of the
Wi-Fi menu section.
The unique identifier for your Wi-Fi network (for the 2.4GHz and
5GHz band). You cannot change the value of this parameter, it is
determined in the device's internal settings.
If you have split your WLAN into parts, the drop-down list contains
two values. Each identifier corresponds to a single part of the
WLAN.
The field is available for the additional part of the network. Select
the checkbox if you want the devices connected to the additional
part of the WLAN to be isolated from the devices and resources of
the router's LAN.
If the checkbox is selected, other users cannot see your Wi-Fi
network (or the selected part of the network). It is recommended not
to select this checkbox in order to simplify initial configuration of
your WLAN.
A name for the WLAN (or the selected part of the network). The
name can consist of digits and Latin characters.
The country you are in. Select a value from the drop-down list.
The wireless channel number.
When the auto value is selected, the router itself chooses the
channel with the least interference.
Upon that the Periodic scan checkbox is displayed.
Page 142 of 257
Configuring via Web-based Interface
Description