D-Link DIR-825/AC User Manual page 98

DIR-825/AC Wireless AC1200 Dual Band Gigabit Router with
3G/LTE Support and USB Port
User Manual
Parameter
PPP IP extension
Static IP Address
PPP debug
Figure 73. The page for creating a new PPPoE connection. The Miscellaneous section.
Parameter
Isolate connection
Enable RIP
NAT
Firewall
Ping
When all needed settings are configured, click the Apply button.
This option is used by some ISPs. Contact your ISP to clarify if this
checkbox needs to be enabled.
Fill in the field if you want to use a static IP address to access the
Internet.
Select the checkbox if you want to log
debugging.
Miscellaneous
When the checkbox is selected, the router uses an alternate routing
table for this connection. Select the checkbox only when your ISP
requires this.
Select the checkbox to allow using RIP for this connection.
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS
attacks.
Select the checkbox to allow the router to answer ping requests from
the external network through this connection. For security reasons,
it is recommended not to select this checkbox.
Page 98 of 257
Configuring via Web-based Interface
Description
all data on PPP connection
Description