Connecting Your Device; Wired Connection; Wireless Connection - HP ELITE X3 User Manual

Connecting your device

Wired connection

To connect your device to the lap dock using the cable included with the lap dock:
1. Press and hold the power button until the lap dock turns on.
2. Connect the cable included with the lap dock to the port for your device on the left side of the lap dock.
3. Connect the other end of the cable to the connector on your device.
NOTE:
the on-screen instructions.
TIP: There might be a slight delay before the lap dock is ready for use.
NOTE: While your device is connected to the lap dock via the included cable, the lap dock charges your
device.

Wireless connection

TIP: For optimal wireless performance, connect your device to a wireless router at 5 GHz. If there is
interference from other wireless devices, use a wired connection.
1. Press and hold the power button to turn on the lap dock.
2. Swipe left on the Start screen to display all apps, and then tap Continuum.
3. Select Set up the first time you connect.
The first time you connect your device to the lap dock, select I see it on your device and follow
Using the optional lap dock 15