Connecting Bluetooth Devices; Connecting To A Wired Network-Lan (Select Products Only); Sharing Or Paying Wirelessly - HP ELITE X3 User Manual

Connecting Bluetooth devices

Before you can use a Bluetooth device, you must establish a Bluetooth connection.
1. Be sure that the Bluetooth device is on.
2.
On your device, swipe down from the top of the screen, and then tap
3. Tap Devices.
4. Tap Bluetooth.
5. Make sure Status is set to On.
6. Select your Bluetooth device from the list, and then follow the on-screen instructions.
NOTE: If the Bluetooth device requires verification, a pairing code is displayed. On the Bluetooth device you
are adding, follow the on-screen instructions to verify that the code on your Bluetooth device matches the
pairing code. For more information, refer to the documentation provided with the Bluetooth device.
NOTE: If your Bluetooth device does not appear in the list, be sure that Bluetooth function on that Bluetooth
device is turned on. Some Bluetooth devices may have additional requirements; refer to the documentation
provided with the Bluetooth device.
Connecting to a wired network—LAN (select products only)
Use a LAN connection if you want to connect the device directly to a router in your home (instead of working
wirelessly), or if you want to connect to an existing network at your office.
Connecting to a LAN requires an RJ-45 (network) cable and the optional desk dock.
For more information about the desk dock ports, refer to the documentation provided with the desk dock.
Contact your IT administrator for proxy settings or VPN configurations.
NOTE: Support for LAN connections via proxy may require additional software. For more information, go to
http://www.hp.com/support.

Sharing or paying wirelessly

NFC technology lets your device communicate with other devices that support NFC. With NFC and supported
apps, you can wave the device over a display at a conference to view more information, tap devices with a
coworker to share work products, or swipe your device to pay at a store.
To enable NFC on your device:
1.
Swipe down from the top of the screen, and then tap
2. Tap Devices.
3. Tap NFC, and then follow the on-screen instructions to select Tap to share or Tap to pay, and make
selections for their settings.
4. Tap the NFC tapping area of your device to the NFC tapping area of another device. You may hear a sound
when the devices are connected.
NOTE: For the location of the NFC tapping area on your device, see
All settings.
All settings.
Back on page
Sharing or paying wirelessly
8.
21