Options - AEG L61470BI User Manual

12 www.aeg.com
Programmes
Standard 40°C cot-
ton
1) At the end of spin phase.
2) Not available for some models.
The information given in the chart above is compliant with the EU Commission regulation
1015/2010 implementing directive 2009/125/EC.

7. OPTIONS

7.1 Temp.
When you set a programme, the
appliance automatically proposes a
default temperature.
Press this button repeatedly until the
indicator of the desired temperature
illuminates.
If you select the position Cold, the
appliance does not heat the water.
7.2 Spin
When you set a programme, the
appliance automatically proposes a
default spin speed. Press this button
repeatedly to select the desired spin
speed. The corresponding indicator
illuminates.
Additional spin option:
Rinse Hold
• If you select this option, the water of
the last rinse is not drained out to
prevent the fabrics from creasing. The
corresponding indicator illuminates.
The washing programme stops with
the water in the drum. The drum turns
regularly to prevent the laundry
creases.
Load (kg) Energy con-
sumption
(kWh)
3.5
Off Mode (W)
0.10
Water con-
sumption
(litre)
0.61 44
Left On Mode (W)
• The Door indicator is on. The door
stays locked to indicate that you must
drain the water.
To drain the water, please
read chapter "At the end of
the programme".
7.3 Stains
Set this option to add a stain phase to a
programme to treat heavily soiled or
stained laundry with stain remover. The
corresponding indicator illuminates.
This option increases the programme
duration.
This option is not available
with a temperature lower
than 40° C.
Put the stain remover into compartment
.
7.4 Extra Rinse
Set this option to add rinsing phases to a
programme. The corresponding
indicator illuminates.
Useful for people allergic to detergents
and in areas where the water is soft.
The phase indicator Extra Rinse
illuminates.
Approxi- Remaining
mate pro- moisture
gramme du-
1)
(%)
ration (mi-
nutes)
140 52
0.98