Other Faults And Problems - Siemens GIGASET SE681 WIMAX User Manual

Troubleshooting
Can the configu-
ration software
be accessed?
No
Check the connection to your Gigaset SE681 WiMAX;
see page 42.
Is there a con-
nection?
No
The TCP/IP network is incorrectly configured on the PC; see next chapter:
"Windows Vista: activating DHCP" on page 47
"Windows XP Home: activating DHCP" on page 50
"Windows 2000: activating DHCP" on page 53

Other faults and problems

You are using a firewall on the PC that prevents access to the Gigaset SE681
WiMAX
Test this, if necessary, by briefly switching off the firewall. If access is possible, configure
the firewall. For details, refer to the user guide for your firewall.
You have forgotten the system password
If you have assigned your own system password or changed and forgotten it, you need
to return your Gigaset SE681 WiMAX to the factory settings; see Chapter "Returning the
Gigaset SE681 WiMAX to factory settings" on page 19.
If you have not yet entered a system password, leave the field empty.
40
Yes Look for a suitable place to set up your Gigaset SE681
WiMAX; see page 13.
Register your Gigaset SE681 WiMAX with the help of the
connection wizard; see page 26.
Yes
The Web browser (Internet Explorer, Mozilla Firefox) is incor-
rectly configured; see page 43.