Sharp DW-71-H Service Manual page 3

Note
Make sure that the unit is operated on a flat and solid surface.
Uneven surface can cause spilling of the stored water and wet other household furnitures or
appliances and cause electric shock, electrical leakage or fire.
During continuous drainage, make sure that the hose is not bent and the hose
outlet is laid down properly.
Otherwise the drained water might spill and wet household appliances.
Lay the hose
on a down
slope.
10 cm or more
Attention
When a draining hose is to be used, make sure that the temperature around the
hose is above 0°C. Otherwise water in the hose might freeze and undrained
water might spill in the room.
When operating
Important
Do not stick your finger or any object into the air outlets
or intake.
The rotating internal fan can cause injuries.
Do not operate the unit with voltages other than the
rated voltage of 230V.
This can result in electric shock or fire.
Do not use an extension power supply cord or share the socket with other
electrical appliances.
This can cause electric shock, overheating or fire.
Avoid damaging the power supply cord or modifying it on your own.
This can cause electric shock or fire.
Laying heavy objects, nipping, heating or pulling can damage the cord.
Do not start or stop the operation by inserting or pulling out the
plug from the socket.
This can cause electric shock or fire.
Avoid heating sources
Do not place the unit near heating sources.
Resin parts of the unit might melt and catch fire.
Do not bend the
drain hose.
Warning
3
Do not put the
open end of
the drain hose
in water.
DW-71-H