Troubleshooting - Silvercrest SND 3600 C2 Operating Instructions Manual

Troubleshooting

The following table will help you to identify and rectify minor
malfunctions:
Fault
PWR LED
not light up.
Poor image quality.
The scanned images
are blurred.
NOTE
► If the above-mentioned solutions do not resolve the problem,
please contact Customer Service (see section Service).
SND 3600 C2
Possible cause
The device is not
does
correctly connected.
Dust on the scanner's
background lighting.
Dust on the film/slide.
The lens of the scanner
has fogged up due to
temperature differences.
Remedy
Connect the device.
Clean the back-
ground lighting (see
section "Cleaning").
Clean the film/slide.
Wait until the device
has acclimatised to
room temperature.
GB │ IE │ NI │
17 ■