Mitsubishi Electric AG-150A Instruction Book page 38

(4)Specify the day(s) for pattern allocation
Follow the same procedures as outlined in section 3-7-2-1(4).
(5)Copy a schedule to another pattern or to another group
Follow the same procedures as outlined in section 3-7-2-1(5).
(6)Save the contents of schedule
Follow the same procedures as outlined in section 3-7-2-1(6).
3-7-3 Modifying Today's Schedule
Click the menu item [Schedule Settings], or click [Today] in the sub menu to display the Today's Schedule
setting screen. Today's Schedule can be used to set a valid schedule for just the current day without modifying
the weekly or annual schedule.
To set Today's Schedule, first select the range and object of the setting and then set the contents of the
schedule.
Note: Settings for the groups whose schedules have been Not Available from the control screen are settable, but Today's
schedules will not be executed.
Note: When the contents of an operation are executed as part of a schedule these contents will continue to be in effect until they
are changed by a schedule or browser etc. Therefore, if you are setting a schedule that is only for a particular day, be sure
to set your schedule in a way that will not impact on the next day's operation.
For example, if you wish to prohibit operations being performed from the remote controller after 17:00, set a Prohibit
operation for 17:00 and set an Enable operation for 23:59.
Setting Range
Select the range that
scheduling will be set for.
Block Name
Select the block to be set.
Group Name
Select the group to be set.
Group Number
Select the group to be set.
Copy (Group) / Paste
Click to copy or paste a
schedule between groups.
Expansion Controller
system selection buttons
Click to display the desired
system.
Undo button
Click to undo the changed.
3-7-3-1 Modifying Today's Schedule for air conditioner and various groups
Text below explains how to modify the today's schedule for the groups of air conditioners, Ventilators
(LOSSNAY), Air-To-Water (PWFY) units, and general equipment.
(1)Select the target for the schedule being set
Follow the procedure outlined for the weekly schedule (see 3-7-1) to select the range and object of the
schedule setting.
(2)Set the contents of the schedule setting
When one of the [Edit] buttons in the Contents of Schedule box is
clicked, a screen to set a schedule operation will appear. Use this
screen to set when to run an operation and set the type of schedule
operation (ON/OFF, operation mode, temperature setting, fan
direction, fan speed, prohibit remote controller operation) and then
press the [OK] button.
It is possible to schedule operation by specifying the settings for
selected items (e.g., operation mode only or preset temperature only).
Note: When [Optimized start] is selected, the unit starts 5 - 60 minutes
before the scheduled time based on the operation data history in
38
Contents of Schedule
Operations set for the
schedule are displayed here.
Edit button
Click to set a schedule
operation.
Delete button
Click to delete a schedule
operation.
Save Settings button
Click to save the contents
of the schedule setting. The
schedule settings will not
be saved unless this button
is pressed.
OK Button