Toshiba GL-1010 Network Fax Operators Manual page 58

Imaging for Windows application, a Windows 95/98/Me/2000 operating
system accessory, is used in the following steps to illustrate the process.
Some applications that support TWAIN formats may not work with the GL
TWAIN Driver. Refer to the specific application documentation or online
Help in that case.
1 Start the Imaging for Windows application.
2 Choose
3 Select the GL TWAIN Driver from the Select Source window.
4 Click
This section describes how to use the GL TWAIN Driver to import routed
fax data. Refer to the TOSHIBA e-STUDIO TWAIN Driver online help for
further information.
Note: The TWAIN scanned data directory is: \\<Controller Name>-
\GL_TWAIN (The Controller Name is GL_XXXXXXXXXXXX at the time of
shipment, where XXXXXXXXXXXX is the MAC ADDRESS of the network
interface card connected to the controller.)
The Windows NT 4.0 Operating System does not include TWAIN
application software. You must obtain this software separately.
1 Start the application.
2 Select
48
from the File menu.
Select Device
Select Source Window
.
OK
from the File menu.
Scan New
GL-1010 Network Fax Operator's Guide