Table of Contents
Advertisement
milk selected.
•
Press the OK icon (B9) to confirm (or the ESC icon (B6) to
cancel the operation.
•
Press the ESC (B6) icon (B6) twice to exit the menu.
Changing the quantity of coffee
•
Press the
(B2) icon (B2) to enter the menu, then press
the
icons (B7) and (B8) (fig. 2) until "PROGRAM
CAPPUCCINO" is displayed.
•
Press the OK icon (B9) to confirm then the
and (B8) (fig. 2) until "COFFEE FOR CAPPUCC." is displayed.
•
Press the OK icon (B9) again.
•
Select the quantity of coffee required by pressing the
icons (B7) and (B8). The progress bar shows the
quantity of coffee selected.
•
Press the OK icon (B9) to confirm (or the ESC icon (B6) to
cancel the operation.
•
Press the ESC icon (B6) twice to exit the menu.
MAKING A NUMBER OF CUPS OF
COFFEE WITH THE JUG FUNCTION
Using this function you can automatically make a number of
cups of coffee (4, 6) directly in the jug (A9) to keep the coffee hot.
•
Turn the jug lid until the arrow lines up with the word OPEN
and remove the lid.
Rinse the jug and lid.
•
Close the jug by turning the lid towards CLOSE until it is
tightly closed and then place it under the coffee spout.
Always position the jug with the handle facing to the right
or left as shown in the figure.
The coffee spout (A13) must be fully raised to enable the
jug to be inserted.
"FILL BEAN CONT. AND WATER TANK, EMPTY WASTE CONT.,
PRESS OK" is displayed. Make sure the water tank is full, the
bean container is full enough and the waste coffee contain-
er is completely empty.
•
Press the OK icon (B9).
The type of coffee selected, for example "EXTRA-MILD JUG",
and the number of cups you want to make with the jug are
displayed, for example "JUG 4 CUPS".
•
Confirm by pressing the
progress bar which indicates coffee making process.
When the progress bar is complete, the appliance finishes
the process and automatically goes back to the coffee jug
icons (B7
function.
If on the other hand an incomplete progress bar is dis-
played, this means that the cycle has not been completed
correctly. Remove the jug and check the message which
appears on the display, consulting the section "DISPLAYED
MESSAGES".
•
Remove jug and leave the lid in the CLOSE position to keep
the coffee hot.
•
To pour the coffee, turn the lid anticlockwise until the arrow
is lined up with the spout of the jug.
Important! When the coffee beans are insufficient to
complete the required function, the appliance stops the process
and waits for the bean container to be filled again and the
icon (B14) to be pressed. For example, when you want to make
4 cups of coffee but the beans are insufficient, the appliance
makes 2 cups then stops making coffee. Fill the bean container
and press the
the appliance makes the 2 remaining cups only to reach the re-
quired number of 4 cups.
If there is not enough water in the tank to complete the required
function or the waste coffee container is full, the appliance in-
terrupts the process. To fill the water tank or empty the waste
coffee container, you must remove the jug. This interrupts the
programme. After rectifying the problem, the programme must
be started again. In this case, you must take the amount of coffee
already delivered into account to avoid the jug overflowing.
CHANGING JUG FUNCTION PA-
RAMETERS
The jug programme is factory set with default values.
These can be modified to suit your personal taste and saved.
You can select 5 different types of coffee from extra-mild to
extra-strong and, with the aid of a graphic bar, 10 quantities of
coffee.
To make these adjustments, proceed as follows:
•
Press the
11
icon (B14). The display shows a
icon (B14). Once the container has been filled,
icon (B2) to enter the menu. Press the
EN
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
