Calling An Answering Machine In The Network; Restoring The Default Settings - Siemens GIGASET SL55 Manual

Calling an answering machine in the network

On base station:
Press 1 and hold. You are connected directly to the answering machine in the network.
If you then press the handsfree key d, you can listen to the answering machine
announcement in the network and operate the answering machine via the network.
Changing the answering machine number in the network
¢ ¢
v w Ð
/
v v
/
s s
/ Change number
~ Í
s s
/ Save entry
Viewing/listening to answering machine messages in network
If a message arrives for you, you receive a call from the answering machine in the net-
work. The number appears in the display if you have requested calling line identifica-
tion. If you accept the call, the new messages are played back. If you do not accept the
call, the number of the answering machine in the network will be stored in the missed
calls list and the message key flashes.

Restoring the default settings

You can select which type of reset is to be performed:
Operational – All MSNs and access codes are deleted and the AM PIN (on Gigaset with
integrated answering machine) is reset to 0000. The authorisations are reset to "Dial
and answer".
Reset all – All functions are reset to the default settings. The system PIN is reset to
"0000". All entries (caller list, charges) are deleted.
i
For both functions: Deactivate all active call diversions before resetting.
The handsets are still registered.
¢ ¢
v w Ð
/
setting
either ...
s s
/ Operational
or ...
s s
/ Reset all
CX203isdn SX205isdn
¢ ¢
Base Settings
Open the submenu.
Select and confirm.
OK
Enter destination number and open the menu.
Select and confirm.
OK
¢ ¢
Base Settings
To restore the functionality:
Select and confirm.
OK
To restore default settings:
Select and confirm.
OK
SX303isdn
¢
System settings
¢
System settings Spec. function
System settings
Network Mailb.
¢
Factory
77