2-1. Notes on Service
2-1-1. Installing Jumper Board
The DA-129 board is provided with a jumper board CN-1566 on it. The CN-1566 board is necessary
when the RC-68 board of OHB-730WS/730WSP/750WSA/750WSAP is not installed. Unless the RC-68
board is installed, be sure to connect the CN-1566 board to the DA-129 board. If not, the video image
will not be displayed normally.
2-1-2. Standard Tightening Torque for Screws
The standard tightening torque for the screws used in BVP-950/950P/950WSPK are as follows.
Screw type
M2
M2.6
M3
M4
BVP-950 P1
Section 2
Service Overview
Tightening torque
_2
19 x 10
N.m (1.9 kgf.cm)
_2
53 x 10
N.m (5.3 kgf.cm)
80 x 10
_2
N.m (8.0 kgf.cm)
140 x 10
_2
N.m (14.0 kgf.cm)
2-1 (E)