How To Remove The Control Base - Sharp SJ-F750SP-BK Service Manual

SJF800SPSL

[3] HOW TO REMOVE THE CONTROL BASE

1. Insert the sharp tool into gap between control panel and control base, and then push it for take out the claw from control base.
CLAW
INSERT SHARP IN THIS POSITION
2. Remove the control panel carefully by hand.
(Take out the claw of control panel from control base)
CLAW
3. Insert the screw driver for take out 5 screws in the position as see the picture.
Control base
screw
( 5mm)
4. Take off the connector (2 connectors) and then remove the control base.
REMOVE IT BY THIS WAY
screw
( 4mm)
Connector
Control panel
Reed sw (for refrigerator compartment)
Reed sw
screw screw (for freezer compartment)
( 4mm) ( 4mm)
(harness color : Black)
Control base
11 – 12
(harness color : Red)
screw
( 5mm)