Control Panel - Sharp SJ-GV69G Operation Manual

Control panel

Controlling temperature
icons
Meaning
Icon
Freezer
compartment
Refrigerator
compartment
Note
• When you press one of the keys, all icons ash once
and show the standby display.
• Mode icons or indicators in operation light up on the
standby display.
When Express cool is in operation, the icon ashes on
the standby display.
Operations of useful modes
1
Select the mode icon.
2
or
Select on/off.
ON/OFF switches in the order by pressing the key.
3
Complete the setting.
Operations of additional modes
Door alarm
• When the refrigerator door is left open for over 1
minute, door alarm sounds once, and again after 1
minute.
• If the door is left open for approx. 3 minutes, the alarm
sounds continuously.
• The alarm stops after close the door.
Turn off operation
Press and
simultaneously
for 3 seconds or more.
(Beep, beep, beep)
(SJ-GV69G, SJ-GV63G)
Useful modes iconsAdditional modes
Icon
Default
setting
Extra cool
-18°C
Express freezing
Express cool
3°C
Plasmacluster
Energy saving
Turn-on state
Current setting
(This indication shows OFF.)
The setting is changed.
The indicator
turns off.
Default
Meaning
setting
OFF
• When there is no operation for approximately 1 minute,
the display returns to the standby display automatically.
The standby display turns off if there is no operation for
another 1 minute.
• If the refrigerator stops because of power failure, the
modes except for Extra cool, Express freezing and
Express cool operate the same way as before at the
time of re-power.
When press
the order shown as below.
Sound of button operation
• The electric sound is operated when touching each
keys.
Turn off operation
Press and
simultaneously
for 3 seconds or more.
(Beep, beep, beep)
Note
When you want to turn on the additional mode, follow the
same step again. (The indicator turns on.)
5
Operation keys
Meaning
Indicator
Door alarm
Sound of
key operation
button, the icons change in
Standby display
"Express cool"only
3
Complete the setting by pressing
for 3 seconds or more.
(Beep, Beep, Beep)
Default
setting
ON
The indicator
turns off.